Body in the Panel&Paint Shop

Here are some pics of the body in the Panel & Paint Shop (2 Pak Repairs 6/36 Kenworth place Brendale QLD 4500). The first two sho wthe body blasted back to bare metal to show the ugly underside. Surprisgly not too much rust, mainly 30years of the good idea fairly with drill holes everywhere where the latest fad of flares, stereo etc have ben added. Plus the numerous dents over 30 years of us. All these dents and holes need to be patched. The two rear 1/4 panels were completely replaced with new ones due to the amount of bog in them. 

 Dont panic fans the yellow paint in the pic below is etch primer, not the final colour, just there to stop rust. At this point the body still has plenty of panel work left before it is good to go for paint.

Heres a pic of me after sanding back the roll bar. The roll bar had foam glued all over it, easily removed with an air powered sander. Did take 90 min though to remove all that crap.